This is my GE Hiak PWMP2 & PWMU2 Repair Page
Low overhead and 35 years Experience means
Low prices and Fast turn-around.
Exchanges are available when Machine down-time is not acceptable.
The PWMP2, (PN: 44A398786 G05) and the
PWMU2, (PN: 44A398786 G08) are interchangeable.
The U stands for Underwriter approved and was required by some
larger purchasers.
Either unit is interchangeable for the other and will work fine.
Questions? Calland
ask for TJ
or email me at
FREE ESTIMATES
90 day warranty on all repairs.
SAVE hundreds of dollars.
GE-HiAK and GE 1050 repairs and exchanges. GE HY-AK
Electronic Circuit Boards, Modules, Drives Power
Supplies and I/O Cards Repaired. All Industrial Electronics, FANUC,
Mazak, Meldas, Mitsubishi CNC, Fuji, Allen Bradley ( A/B ), and most others at
low prices and fast service.
PWM50
I repair the following General Electric GE-HIAK Drives and Boards
PWMP1, GE 44A398797 G01, PWMP2, PWMP3, PWMP4, PWMP5,
PWMU1, GE 44A398797 G04, PWMU2, PWMU3, PWMU4,PWMU5, and PWM50,
PWMR2B- GE 44A398788G02 - Servo Drive Card
PWMC4 HI-AK Turret Drive Board GE 44A398795G04 GE HIAK
PWMU3A HIAK Servo Drive Board General Electric HI-AK GE 44A719208-001
PWMP3 HIAK Servo Drive Board General Electric HI-AK GE 44A398786-G02
PWMRL1 HIAK Servo Drive Board General Electric HI-AK GE 44B398240-001
PWML1B HIAK Servo Drive Board General Electric PN GE 44A398700-G01
GE HIAK - PWM SERVO DRIVE CARD - PWMR3A - 44A398788G05
GE 44A398795-G01 PWMC3 HI-AK Drive Control Board
GE 44A398795-G04 PWMC4 HIAK HI-AK
FANUC 6,Fanuc 0, O, 10, 11, 12 , 15 Control Repair.
Meldas, Mitsubishi CNC Control Repair.